Bose Aviation Headset X Kullanıcı El Kitabı - Sayfa 29

Kulaklıklar Bose Aviation Headset X için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose Aviation Headset X 36 sayfaları. Owner's guide
Ayrıca Bose Aviation Headset X için: Kullanıcı El Kitabı (36 sayfalar), Hızlı Kurulum Kılavuzu (1 sayfalar), Kullanıcı El Kitabı (16 sayfalar), Kullanıcı El Kitabı (36 sayfalar)

Figure 23

Removing and attaching the

headband cushion

Battery door replacement

1. Slide the battery door down using the finger indent and lift open.

2. Gently rotate the cover sideways to remove from the control

module.

3. Insert new door tab, being careful to insert between the metal

spring and plastic housing.

The headband cushion is designed to give the maximum level of

comfort to your headset.

Please follow the maintenance instructions below for regular care.

Bose recommends that the cushion be replaced after regular care

and maintenance fails to restore the wool pile to its original size and

shape.

To replace the cushion (Figure 23):

1. On a protected surface, turn the headset upside down. With

another person holding the headset open for you, remove the

old cushion from the magnesium headband.

2. With the headband still held open, align the center of the new

cushion with the center of the headband and press firmly from

the center toward the outside.

Note: Removing and attaching the headband cushion may be easier if a

second person holds the headset open.

Replace the boom microphone cable or connector access cover as

described in "Removing an attached boom microphone cable" and

"Attaching the boom microphone cable" on page 11.

EADSET

ARE AND

Headband cushion

AINTENANCE