247Blinds Plantation Shutter Montaj Talimatları Kılavuzu - Sayfa 2
İç Mekan Mobilyaları 247Blinds Plantation Shutter için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. 247Blinds Plantation Shutter 7 sayfaları.
Sayfayı YazdırYour new shutter comes with a few basic pieces:
o Shutter panels in rectangular boxes.*
o Frames in a separate, longer box.*
o A small box of hardware needed to install.
o A small bottle of touch up paint is also supplied.
o Screws to put the shutter together, long for the frame, short for locking the hinges on the
frame in position. Locking screw goes into the middle hole after all panel adjustments
have been made.
o Magnet plates
o Hinge pins, to connect the panels to the frames
o A plastic Hoffman key – These can come in two sizes.
*Where possible to avoid transit damage, we try to streamline packaging, this could mean, where the
shutter is small enough, for example a 1-panel size, that you only receive the one box. Open it up and layout
your pieces, and if you're worried you've not received the full kit; give us a call on 01484 443790.
You don't need expert tools for the job, but we'd recommend the following:
o Pencil to mark out your bracket placements
o A star-headed screwdriver, or power drill to quicken things up.
o A measuring tape to help measure up bracket placements.
o The correct screws and wall plug for the surface you'll be fitting your blind to. This could
be plaster, wood or even steel so we'd recommend looking online to ensure you get the
best fittings for your shutter and surface type. If fitting to masonry, drill and use the
appropriate wall plug. If fitting to uPVC, once you feel the screw start to bite, stop drilling.
Recommended Extras: Spirit level, Decorators Caulk & Packing material such as cardboard or
wedges.
247blinds.co.uk
Reviewed 06/12/2021
Next Review: 06/12/2023
What comes with my blind?
What do I need to fit?