Anker 7 Series Kullanıcı Kılavuzu - Sayfa 6

Taşınabilir Jeneratör Anker 7 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Anker 7 Series 12 sayfaları. Portable power station ganprime powerhouse 2048wh
Ayrıca Anker 7 Series için: Kullanıcı Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (15 sayfalar)

Sayfayı Yazdır

Specifications

Cell Capacity

2048 Wh

AC Input Voltage

120V~ 12A Max, 60Hz

AC Input Power (Charging)

1440W Max

AC Input Power (Bypass Mode)

1440W Max

Solar Panel Input

11-32V

Car Charger Output

12V

10A

AC Output

120V~ 20A, 60Hz, 2400W Max

USB-A Output

2.4A (2.4A Max Per Port)

USB-C Output (100W)

3A/9V

UPS

20ms

Discharging Temperature

-4°F-104°F / -20°C-40°C

Charging Temperature

32°F-104°F / 0°C-40°C

Size

20.7 × 15.5 × 9.8 in / 52.5 × 39.5 × 25.0 cm

Net Weight

67.2 lb / 30.5 kg

Attention

Not permitted on aircraft.

IMPORTANT SAFETY INSTRUCTIONS

WARNING - When using this product, basic precautions should always be followed, including the following:

• Read all the instructions before using the product.

• To reduce the risk of injury, close supervision is necessary when the product is used near children.

• Do not put fingers or hands into the product.

• Do not expose the product to rain or snow.

•

Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire,

electric shock, or injury.

•

To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when

disconnecting the product.

• Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire

or injury.

•

Do not use the product or attachment that is damaged or modified. Damaged or modified batteries may exhibit

unpredictable behavior resulting in fire, explosion, or risk of injury.

•

Do not operate the product with a damaged cord, plug, or output cable.

• Do not disassemble the product. Take it to a qualified service person when service or repair is required.

Incorrect reassembly may result in a risk of fire or electric shock.

• Do not expose the product to fire or high temperatures. Exposure to fire or temperatures above 130°C may

cause explosions.

• To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.

• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure

that the safety of the product is maintained.

07 EN

10A; 32V-60V

20A (1000W Max)

3A/15V

3A/20V

5A (100W Max Per Port)

• When charging a device, the product may feel warm. This is a normal operating condition and should not be a

cause for concern.

• When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.

• Do not clean the product with harmful chemicals or detergents.

• Misuse, dropping, or excessive force may cause product damage.

• When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems

separate from each other.

• Do not use or store the power station in direct sunlight for a long period, such as in a car, cargo bed, or any other

place where it will be exposed to high temperatures. Doing so may cause the product to malfunction, deteriorate,

or generate heat.

CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

• Disposal of a battery into a fire or hot oven, or mechanically crushing or cutting off a battery, can result in an explosion.

• Leaving a battery in an extremely high-temperature environment can result in an explosion or leakage of

flammable liquid or gas.

• A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas.

• Unplug the AC power cable to disconnect from the line voltage.

WARNING: GROUNDING INSTRUCTIONS

This product must be grounded. In the event of a malfunction or breakdown, grounding provides a path of least

resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord with an

equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly

installed and grounded in accordance with all local codes and ordinances.

WARNING – Improper connection of the equipment grounding conductor may result in an electric shock. Check

with a qualified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the

plug provided with the product. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

Storage and Maintenance Instructions

1. Store the product between 32°F-104°F (0 °C -40 °C ). Avoid exposing the product to rain or using the product in

a humid environment.

2. To preserve the battery lifespan, charge to 100% after using. If you plan to store your power station, recharge

to 100% every 3 months.

3. Keep the product on a flat surface when using, charging, and storing.

Bluetooth: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and

any use of such marks by Anker Innovations Limited (or Anker Technology Co., Limited) is under license.Other

trademarks and trade names are those of their respective owners.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna.

(2) Increase the separation between the equipment and receiver.

(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

(4) Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party.

Company Name: Fantasia Trading LLC

Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764

Telephone: +1-800-988-7973

EN 08