DROPSA SUMO II Series Kullanım ve Bakım Kılavuzu - Sayfa 2

Su Pompası DROPSA SUMO II Series için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. DROPSA SUMO II Series 13 sayfaları.

1. INTRODUCTION

This User and Maintenance Manual refer to Dropsa's "SUMO II".

You can find additional copies and newer revisions of this document from our website http://www.dropsa.com.

Alternatively contact one of our Sales Offices.

This manual contains important information on health and safety issues the personnel. It is recommended to attentively read

this manual and carefully keep it in good condition so that it is always available to personnel requiring to consult it.

The SUMO II series of lubrication pumps may be adapted to many uses without making any mechanical changes even after it has

been installed. In fact, by making a selection from a set of components which are fully compatible and easy to assemble, the

pressure, quantity of lubricant delivered, actual type of lubricant or type of distribution can be altered.

This construction technique is essentially based on the following modules:

• Electric motor

• Pump body with integrated reducer

• Two pumping elements

• Reservoir

• Valves and outlet unit (inverter, pressure adjustment valve, etc.).

There is only one bearing structure for all versions, with the dual pumping element constituting the essential module.

The pump unit possesses one single output, because the deliveries from the two pumping elements flow into a manifold unit.

Two types of tank for grease and two for oil with different volumes (of 30 or 100 kg) with stirring paddle and level indicators can

be arranged on the pump body.

The SUMO II electric pump is fully protected against the external environment and can operate without difficulty under the most

severe environmental conditions.

Machine identification label is located on the front side of the reservoir and

contains product serial number, input voltage and details of the operating

parameters.

380 cc/min