DROPSA SUMO II Series Посібник з експлуатації та обслуговування - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з експлуатації та обслуговування для Водяний насос DROPSA SUMO II Series. DROPSA SUMO II Series 13 сторінок.
Друкувати сторінку
1. INTRODUCTION
This User and Maintenance Manual refer to Dropsa's "SUMO II".
You can find additional copies and newer revisions of this document from our website http://www.dropsa.com.
Alternatively contact one of our Sales Offices.
This manual contains important information on health and safety issues the personnel. It is recommended to attentively read
this manual and carefully keep it in good condition so that it is always available to personnel requiring to consult it.
2. GENERAL DESCRIPTION
The SUMO II series of lubrication pumps may be adapted to many uses without making any mechanical changes even after it has
been installed. In fact, by making a selection from a set of components which are fully compatible and easy to assemble, the
pressure, quantity of lubricant delivered, actual type of lubricant or type of distribution can be altered.
This construction technique is essentially based on the following modules:
• Electric motor
• Pump body with integrated reducer
• Two pumping elements
• Reservoir
• Valves and outlet unit (inverter, pressure adjustment valve, etc.).
There is only one bearing structure for all versions, with the dual pumping element constituting the essential module.
The pump unit possesses one single output, because the deliveries from the two pumping elements flow into a manifold unit.
Two types of tank for grease and two for oil with different volumes (of 30 or 100 kg) with stirring paddle and level indicators can
be arranged on the pump body.
The SUMO II electric pump is fully protected against the external environment and can operate without difficulty under the most
severe environmental conditions.
3. PRODUCT IDENTIFICATION
Machine identification label is located on the front side of the reservoir and
contains product serial number, input voltage and details of the operating
parameters.
380 cc/min
2