anko SL153B Manuel - Sayfa 13

Elektrikli Süpürge anko SL153B için çevrimiçi göz atın veya pdf Manuel indirin. anko SL153B 20 sayfaları.

Alternatively, the Lid and internal mechanism can be removed in one

piece to aide in cleaning of the dust canister.

To remove, hold the dust canister body firmly and rotate the lid then

pull straight out as shown.

Brush the inside of the dust canister with a small brush or wash Refer

•

to section "Cleaning".

To refit the Lid and internal mechanism in to the

•

dust canister, line up the padlock symbols on the

dust canister with the arrow on the side of the lid

and turn until it locks in place.

•

To refit the Dust Canister in to the vacuum cleaner, simply align the

dust canister into its position and push down until it locks in place.

12 User Maintenance

WARNING: The plug must be removed from the power socket before any

maintenance, cleaning or replacement of parts.

NOTE: To maximise the performance of your vacuum cleaner, you should

clean your filters regularly.

If the filters are broken or worn, replace them before continuing to use the

vacuum.

Filters can be purchased from our Customer Service. You can call our

customer service toll free number: 1300 105 888 or via email

Page 13 of 20