Ankom TDF23 Servis Prosedürü - Sayfa 7

Ölçüm Cihazları Ankom TDF23 için çevrimiçi göz atın veya pdf Servis Prosedürü indirin. Ankom TDF23 9 sayfaları. Paddle bar replacement

16.

Secure the Shoulder Screw in place.

a. Tilt the instrument forward to access the back once

again.

b. Remove the Shoulder Screw installed finger-tight in the

previous step.

c. Apply a drop of Loctite 242 (provided in the new

Paddle Bar kit) to the threads of this screw.

d. Re-install the screw (do Not to get the Loctite on the

brass Rod End of the Mixer Piston) and tighten with the

⅛" Hex key wrench.

e. Return the instrument to its upright position.

f. Reinstall the two Service Access screws.

ANKOM Technology  2052 O'Neil Road  Email: [email protected] Phone: 315-986-8090  Fax: 315-986-8091

Paddle Bar Replacement

TDF

Service Procedure

Apply

Loctite

1/8"

Hex key

Wrench

Service

Access

Screws

TS021

Revised: 01/24/2017

pg. 7 of 9