DrunkLizard X7 Kullanıcı Kılavuzu - Sayfa 8

Scooter DrunkLizard X7 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DrunkLizard X7 10 sayfaları.

Sayfayı Yazdır

4 Battery Instructions

These instructions show how to charge and maintain the battery, along with safety notices and the specifications.

Please use the battery properly according to this manual to prolong the battery life and its performance.

4.1 Battery Specifications

Name

Parameter

Battery Type

Li-ion battery

Working Temperature

Charging Time

2-3 hours

Charging Temperature

Max Charging Voltage

Voltage

36V

4.2 Battery Safety

Do not continue to use the battery when the following conditions occur:

• The battery of the electric scooter should be used within local laws; do NOT disassemble, tamper or attempt to open the

battery casing. Dispose of battery according to local regulations consistent with lithium-ion battery recycling/disposal.

• Do not use if there is an odor or in excessive heat, or if there is a leak of any substance. (Do not touch anything leaking

from the battery.)

• Do not let children and animals touch the battery. You must unplug the charger before installing the battery or riding.

• If you want the electric scooter to run most efficiently, the battery must be fully charged and used within the temperature

range indicated in the battery specifications. Recharging should happen when almost fully used to maintain battery life.

• Lithium batteries are considered dangerous to travel via air. Check with airlines before attempting to fly with the scooter.

• The battery contains dangerous substances. Please do not open the battery. Do not insert anything into the battery.

Tip: When the internal temperature of the battery exceeds 45°C/112°F, the battery is protected and will not

discharge current.

Do not charge the battery in high temperature (40 °C/104°F) environments.

Only use the original charging equipment to charge the electric scooter.

- 13-

Parameter

Name

Parameter

Store Time (10"C-40

0"C-35"C/32"F-95"F

3 months (100% charge)

Battery Capacity

5Ah/6.4Ah

0"C-35"C/32"F-95"F

42V

Max Charging Current

4.3 Charging steps:

Please note, the battery does not come fully charged out of the box, so charge before first use.

• Open the charging port cover; make sure the charging port is clean and dry.

• Connect the charger with the battery and the other end with power (1 00V-240V;50/60Hz); make sure the charging indicator is on.

• When the indicator light on the charger is on, this indicates it is charging; otherwise, check if the line connection is good.

• When the indicator on the charger has changed color (from red to green), it indicates that the battery has been filled to 99%. At

this time, remove the charger. (Leaving the charger plugged in after a full charge is safe, but will degrade the battery life over time.)

Charging method 1:

Tips:

When using method 1: Ensure the battery is inside the scooter, with the silicone charging cover completely closed.

When using method 2: Remove the battery from the scooter and open the silicone charging port.

Both methods: Plug the charger DC plug into the battery charging port; plug the power cord into the charger. Then,

connect the other port into the socket (100V-240V; 50/60Hz), and confirm the charger indicator is on.

Cover the charging port with the anti-dust rubber cover after charging so as not to risk metal touching the

charging port and short-circuiting, causing damage and potential fires.

Charging method 2:

-14-