Anslut 016990 Kullanım Talimatları Kılavuzu - Sayfa 10

Fener Anslut 016990 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Anslut 016990 12 sayfaları. Bulkhead luminaire

EN

SAFETY INSTRUCTIONS

Intended for indoor and outdoor use.
The electrical installation must comply
with local regulations. Consult an
authorised electrician if in doubt.
Always follow the electrical specifications
on the product labelling.
Always switch off the power supply before
installation, connection and maintenance.
Never modify the product, this could result
in serious personal injury and/or material
damage, and will invalidate the warranty.
The product must be connected to an
earthed power supply on installation.
Do not use the product without the glass
cover.
The product gets very hot when it is
switched on. Do not touch the product
with bare hands.
Switch off and allow the product to cool
before replacing the light source.

ELECTRICAL SAFETY

New installations and extensions to existing
systems should always be carried out by
an authorised electrician. If you have the
necessary experience and knowledge
(otherwise contact an electrician), you can
replace power switches and wall sockets,
fit plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of fire.
10
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle end-of-life product
in accordance with local
regulations.

TECHNICAL DATA

Rated voltage
Output
Socket
Protection rating
DESCRIPTION
1.
Screw
2.
Protective grille
3.
Glass cover
4.
Rubber ring
5.
Bulb socket
6.
Protective ring
7.
Base
8.
Expansion plug
9.
Shield
FIG. 1
230 V ~ 50 Hz
Max 60 W
E27
IP44