DSC Power Series Hızlı Referans Kılavuzu

Dokunmatik ekran DSC Power Series için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. DSC Power Series 2 sayfaları. Neo image sensor
Ayrıca DSC Power Series için: Referans Kılavuzu (2 sayfalar), Manuel (18 sayfalar), Kurulum Kılavuzu (14 sayfalar), Kurulum Talimatları (2 sayfalar), Hızlı Kılavuz (4 sayfalar), Kurulum Talimatları Kılavuzu (11 sayfalar)

From Tyco Security Products

PowerSeries

Security System

Quick Reference Guide

To arm entire system – both interior and perimeter

Close all windows and doors (the green Ready light will turn ON)

•

• Press and hold (Away) for 2 seconds (the keypad will beep rapidly

5 times and the red Armed light will turn ON)

• Exit premises before the delay time expires

To disarm system when you return

When you enter through the door, the keypad will emit a steady warning tone

•

• Enter your 4-digit Master Code or User Code (the armed light will turn OFF)

• If you make an error, press and enter the 4-digit code again

To arm perimeter of building and still move freely inside

• Press and hold (Stay) for 2 seconds

To arm system with door or window open

Press

while disarmed

•

• The Bypass light will flash

• Enter the 2-digit zone number to be bypassed

• To exit the Bypass function press

To silence alarm

Enter your 4-digit Master Code or User Code

•

When trouble light comes on

Press

•

• Some keypads will describe the Trouble (full-message keypads); others will

only identify the Trouble number (fixed-message and LED keypads)

• If Trouble number 8 is lit, the time and date needs to be reset

• For all other Trouble conditions, contact your security provider

To set time and date

•

Press

and enter the 4-digit Master Code

• 1 long beep indicates an error, press and enter the Master Code again

• After 4 short beeps, press then 10 digits, 2 each for the hour, minute,

month, day and year (HH:MM MM/DD/YY)

- Use a 24-hour clock (e.g. 8:30 pm = 20:30)

- Use 2 digits each to indicate the month and day (e.g. March 8 = 03 08)