DSC Power Series 빠른 참조 매뉴얼
{카테고리_이름} DSC Power Series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC Power Series 2 페이지. Neo image sensor
DSC Power Series에 대해서도 마찬가지입니다: 참조 매뉴얼 (2 페이지), 매뉴얼 (18 페이지), 설치 매뉴얼 (14 페이지), 설치 지침 (2 페이지), 빠른 매뉴얼 (4 페이지), 설치 지침 매뉴얼 (11 페이지)
From Tyco Security Products
PowerSeries
Security System
Quick Reference Guide
To arm entire system – both interior and perimeter
Close all windows and doors (the green Ready light will turn ON)
•
• Press and hold (Away) for 2 seconds (the keypad will beep rapidly
5 times and the red Armed light will turn ON)
• Exit premises before the delay time expires
To disarm system when you return
When you enter through the door, the keypad will emit a steady warning tone
•
• Enter your 4-digit Master Code or User Code (the armed light will turn OFF)
• If you make an error, press and enter the 4-digit code again
To arm perimeter of building and still move freely inside
• Press and hold (Stay) for 2 seconds
To arm system with door or window open
Press
while disarmed
•
• The Bypass light will flash
• Enter the 2-digit zone number to be bypassed
• To exit the Bypass function press
To silence alarm
Enter your 4-digit Master Code or User Code
•
When trouble light comes on
Press
•
• Some keypads will describe the Trouble (full-message keypads); others will
only identify the Trouble number (fixed-message and LED keypads)
• If Trouble number 8 is lit, the time and date needs to be reset
• For all other Trouble conditions, contact your security provider
To set time and date
•
Press
and enter the 4-digit Master Code
• 1 long beep indicates an error, press and enter the Master Code again
• After 4 short beeps, press then 10 digits, 2 each for the hour, minute,
month, day and year (HH:MM MM/DD/YY)
- Use a 24-hour clock (e.g. 8:30 pm = 20:30)
- Use 2 digits each to indicate the month and day (e.g. March 8 = 03 08)
www.dsc.com | 1-888-888-7838