DSM VF-150 OEM Kullanıcı Kılavuzu - Sayfa 2

Amplifikatör DSM VF-150 OEM için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DSM VF-150 OEM 7 sayfaları.

Sayfayı Yazdır

Please review the following points for both personal and equipment safety while operating the

linear piezoelectric amplifier.

HIGH ENERGY/VOLTAGE WARNINGS

Exercise caution when using amplifiers. High energy levels can be

stored at the output voltage terminals on all amplifiers in normal

operations. In addition, potentially lethal voltages exist in the power

circuit and the "output" connector. Filter capacitors store potentially

dangerous energy for some time after power is removed.

OPERATING AND SERVICES PRECAUTIONS

Operate the amplifier in an environment free of flammable gases or fumes. Do not use substitute

parts or make any unauthorized modifications to the amplifier to ensure that its safety features

are not degraded. Contact DSM for service and repair assistance.

SPECIFICATIONS

• Typical Output Voltages:

• Maximum Continuous Current:

• Maximum Peak Current:

• Gain V/V

• Dimensions: L x W x H

• Dimensions: L x W x H with heat sink

• Amplifier bandwidth:

• Electrical Noise on Output:

• Short circuit, over-current, and over-temperature protection

• Connectors:

VF-150 OEM

-100 to +100 V

-40 to +200 V

-30 to +150 V

-20 to +120 V

Output range will be V

150 mA (Capacitive load)

300 mA (Capacitive load)

~58 +/- 5% (see AGA command)

2.0" x 1.0" x 0.5" (50.8mm x 25.4mm x 12.7mm)

2.0" x 1.0" x 1.0" (50.8mm x 25.4mm x 25.4mm)

~10 kHz (-3dB)

~1mVrms (power supply dependent)

FCI 10106813-021112LF

FCI 10106813-041112L

Hardware Version V131028

CAUTION

RISK OF DANGER

+ 5V to V

Neg Rail

114 Southeast Parkway Ct.

Ste 160

Franklin, TN 37064

Tel: 615/595-6665

Fax: 615/595-6610

– 5V

Pos Rail