DSPPA DM836N Çalıştırma Talimatları Kılavuzu - Sayfa 10

MP3 Çalar DSPPA DM836N için çevrimiçi göz atın veya pdf Çalıştırma Talimatları Kılavuzu indirin. DSPPA DM836N 12 sayfaları. Joy series. smart music player with amplifier

Sayfayı Yazdır
2. Touch "Music List" icon to enter SD card directory, click root directory
on the left, the right will display all songs in the root directory
(as shown in figure).
Click any song to start playing (as shown in figure).
Return
Reminder: Song files can only be allowed in the root and first level directories.
2. Touch "Music List" icon to enter SD card directory, click root directory
on the left, the right will display all songs in the root directory
(as shown in figure).
Click any song to start playing (as shown in figure).
Return
Reminder: Song files can only be allowed in the root and first level directories.
Play / Pause
- 7 -
Play / Pause
- 7 -
Line in and out setting
• Line input: it can select between 500mV and 1V. Select according to
the actual equipment input situation.
• Line output: follow system volume to turn on, and the output volume
is controlled by the machine. You can use the machine to adjust
volume; follow the off of system volume to turn off and volume is
controlled by the connected equipment, so you need to adjust volume
on this equipment.
Network
Touch "Network" icon on setting interface to enter the
network detection interface (as shown in figure).
When the network is normally connected, the screen will display
the allocated IP address. If no IP address is displayed, the equipment
does not get to IP address. Now, click "Repair Network" button to
re-get IP address.
When setting up "ON" ,it will automatically get DHCP.
Line in and out setting
• Line input: it can select between 500mV and 1V. Select according to
the actual equipment input situation.
• Line output: follow system volume to turn on, and the output volume
is controlled by the machine. You can use the machine to adjust
volume; follow the off of system volume to turn off and volume is
controlled by the connected equipment, so you need to adjust volume
on this equipment.
Network
Touch "Network" icon on setting interface to enter the
network detection interface (as shown in figure).
When the network is normally connected, the screen will display
the allocated IP address. If no IP address is displayed, the equipment
does not get to IP address. Now, click "Repair Network" button to
re-get IP address.
When setting up "ON" ,it will automatically get DHCP.
- 12 -
- 12 -