DSPPA DM836N Çalıştırma Talimatları Kılavuzu - Sayfa 8

MP3 Çalar DSPPA DM836N için çevrimiçi göz atın veya pdf Çalıştırma Talimatları Kılavuzu indirin. DSPPA DM836N 12 sayfaları. Joy series. smart music player with amplifier

Sayfayı Yazdır
Local Music
Local Music
1. Touch "
" icon on the main interface to enter music play
interface (as shown in figure).
Icon Introduction
"
" Return
"
" Previous song
"
" Music list
"
" Play/Pause
"
" Order play
"
" Random play
"
" Single cycle
"
2. Touch "Music List" icon to enter the selection interface of stored
Song List (as shown in figure).
Local Music
Local Music
1. Touch "
" icon on the main interface to enter music play
interface (as shown in figure).
Icon Introduction
"
" Return
"
" Previous song
"
" Music list
"
" Play/Pause
"
" Order play
"
" Random play
"
" Single cycle
"
2. Touch "Music List" icon to enter the selection interface of stored
Song List (as shown in figure).
"
" Next song
"
" Loop play
"
" Single play
" Volume control
- 5 -
"
" Next song
"
" Loop play
"
" Single play
" Volume control
- 5 -
Other Settings
Touch "Other settings" icon on setting interface to enter other setting
interface (as shown in figure).
• Room address: is the address of the 485 protocol communication
device, touch "-,+" can set the room.
• Backlight time: five settings namely 15s, 30s, 60s, 120s and always
can be selected.
• Backlight adjustment： drag the slider to adjust the brightness of
the screen.
• Trigger linkage settings
Touch trigger settings enter the settings interface.
Trigger volume: touch slider can set the volume size.
Trigger mode: the trigger mode can be switched in single and
continuous.
Once: the signal is triggered once, the device will play all the time
and needs to be manually closed.
Continue: signal trigger continuous detection, there is a signal to
play, no signal to stop playing.
Alarm setting: when the folder has the name "z_alarm_bell.mp3" (z
is ringtone) A ringtone that will play the alarm by default when
triggered.
Trigger song settings: touch "alarm ringtone" will enter the song
selection interface.
Other Settings
Touch "Other settings" icon on setting interface to enter other setting
interface (as shown in figure).
• Room address: is the address of the 485 protocol communication
device, touch "-,+" can set the room.
• Backlight time: five settings namely 15s, 30s, 60s, 120s and always
can be selected.
• Backlight adjustment： drag the slider to adjust the brightness of
the screen.
• Trigger linkage settings
Touch trigger settings enter the settings interface.
Trigger volume: touch slider can set the volume size.
Trigger mode: the trigger mode can be switched in single and
continuous.
Once: the signal is triggered once, the device will play all the time
and needs to be manually closed.
Continue: signal trigger continuous detection, there is a signal to
play, no signal to stop playing.
Alarm setting: when the folder has the name "z_alarm_bell.mp3" (z
is ringtone) A ringtone that will play the alarm by default when
triggered.
Trigger song settings: touch "alarm ringtone" will enter the song
selection interface.
- 14 -
- 14 -