3onedata ES5026 Kullanıcı Kılavuzu - Sayfa 16

Anahtar 3onedata ES5026 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3onedata ES5026 20 sayfaları. Gigabit managed poe switch

User manual

Picture 5.5.3.1 Configuration of Port Isolation

5.5.4 Loop Protection

Picture 5.5.4.1 Loop Detection

There are two Loop protection modes: Off and Loop Protection, the default configuration is Loop Protection mode.

When there is a loop detected, the related port will be blocked and port indicator will be red on,and the buzzer will

alarm.

Picture5. 5.5.1 PoE Config

This page allows users to configure PoE features.

Enable Bar: users can select from " Enable or Disable" in the Enable list, if "Disable" selected, the PoE power

supply will be cut off;

Priority Bar: users can select from Priority List three priority levels " Low/ Middle/High" , specific ports can be

configured as power supply priorities. The priority ports can get normal power supply when the PoE power supply

is overloaded;

Current(mA) Bar: the output currents of specific ports are showed;

Voltage(V) Bar: the output voltages of specific ports are showed;