Anybus Communicator CAN PROFINET IRT 2.32 Ağ Kılavuzu - Sayfa 9

Sunucu Anybus Communicator CAN PROFINET IRT 2.32 için çevrimiçi göz atın veya pdf Ağ Kılavuzu indirin. Anybus Communicator CAN PROFINET IRT 2.32 20 sayfaları. Interface
Ayrıca Anybus Communicator CAN PROFINET IRT 2.32 için: Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Installation
3.2

LED Indicators

Fig. 5
Front view
LED
GW Status
LINK/ACT
NS
MS
®
Anybus
X-gateway
™
PROFINET
Top-mounted
GW Status
LINK/ACT1 (X1.1)
NS
MS
LINK/ACT2 (X1.2)
Indication
Gateway status, see Anybus X-gateway User Manual
Green
Green, flickering
Off
Off
Green
Green, 1 flash
Green, blinking
Red
Red, 1 flash
Red, 2 flashes
Red, 3 flashes
Alternating Red/Green
Off
Green
Green, 1 flash
Red
Alternating Red/Green
®
IRT (2.32) Interface Network Guide
GW Status
LINK/ACT1 (X2.1)
NS
MS
LINK/ACT2 (X2.2)
Bottom-mounted
Meaning
Link OK
Transmitting/receiving data
Link not detected or no power
Offline
- No power- No connection with IO Controller
Online (RUN)
- Connection with IO Controller established
Online (STOP)
- Connection with IO Controller established
- IO Controller in STOP state or IO data bad
- RT synchronization not finished
Node identification (see manual)
Fatal error
Station name error
IP address error
Configuration error
Firmware update in progress
No power or initializing
Normal operation
Diagnostic event present
Fatal error
Firmware update in progress
7 (18)
SCM-1202-028-EN 1.1