AnyDATA ACT233F Kullanıcı Kılavuzu - Sayfa 12

GPS AnyDATA ACT233F için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AnyDATA ACT233F 14 sayfaları. 4g vehicle tracker with hotspot

Sayfayı Yazdır
5 P
O
/O
OWERING
N
5.1 P
O
/OFF
OWERING
N
To Power ON:
1. Insert the device to OBD-II connector.
2. Then, the device has automatically powered on according to vehicle
condition.
3. There is no visual way to confirm whether device has power-on or not.
4. But, user can make sure the location from web-server, or application.
To Power OFF:
1. If the device is needed for totally power-off, then just remove it
from the OBD-II connector.
2. In case of the car has engine off with ACT233F, and passed several
days, the device has automatically power-off to protect the battery
drain fully.
3. The device will stay power-off until the car ignition-on again.
4. If the device detects the battery level over 13.5V, then start the
powering on.
All Rights Reserved.
4G Vehicle Tracker with Hotspot user Manual (ACT233F)
4G V
FF THE
EHICLE
T
H
RACKER WITH
OTSPOT
12/13