DuctSox U-Track Kurulum Kılavuzu - Sayfa 5

Endüstriyel Ekipmanlar DuctSox U-Track için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DuctSox U-Track 16 sayfaları.

Sayfayı Yazdır

Track supports: Quick-connection or U-Bolt

The Track Supports are the main structural support between the U-track & DuctSox and the structure of

the building. A Quick-Connection Track Support OR a U-Bolt Track Support are the available options.

Quick-Connection Track Support Option

Hook end is attached

to structure above the

DuctSox. DO NOT loop

the hook back onto the

cable, this could cause

the hook to detach. Hook

must be hooked into part

of the building structure,

for example an eyebolt

attached to the ceiling. Nut

on the end of the stud is

permanently fixed and is

not adjustable. This nut is

slid into the top channel

of the track. After stud

and cable are in their proper location the top nut

(7/16"wrench) on the stud must be tightened onto

the track while holding the stud with a pliers. After

adjusting the track height trim excess cable as

needed.

NOTE for both supports: Placing track at the proper elevation (this could be an angle for a sloped

ceiling) and straightness is critical for a good installation.

U-Bolt Track Support Option OR Pool Applications

A roll of cable, U-bolts,

square nuts for U-bolts,

regular nuts for U-bolts

and cable clamps are

supplied. Length from the

ceiling support and the

top of the track needs to

be determined by installer.

A cable loop is created

at the top of the cable

length by a cable clamp.

Be sure the installed

cable does not contact

any sharp edges; for

example, loop the cable

through an eyebolt attached to the ceiling. Be sure

all of the threads of the square nuts are engaged

to the U-bolt. The square nuts on the end of the

U-bolt are slid into the top channel of the track.

After U-bolt and cable are in their proper location

the nuts (7/16"wrench) on the U-bolts must be

tightened onto the track. A cable loop is created at

the top of the track by the cable through the U-bolt

clamp. After adjusting the track height trim excess

cable as needed.

Standard

Pools

Installation Guide: U-Track