DuctSox U-Track Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Urządzenia przemysłowe DuctSox U-Track. DuctSox U-Track 16 stron.
Drukuj stronęTrack supports: Quick-connection or U-Bolt
The Track Supports are the main structural support between the U-track & DuctSox and the structure of
the building. A Quick-Connection Track Support OR a U-Bolt Track Support are the available options.
Quick-Connection Track Support Option
Hook end is attached
to structure above the
DuctSox. DO NOT loop
the hook back onto the
cable, this could cause
the hook to detach. Hook
must be hooked into part
of the building structure,
for example an eyebolt
attached to the ceiling. Nut
on the end of the stud is
permanently fixed and is
not adjustable. This nut is
slid into the top channel
of the track. After stud
and cable are in their proper location the top nut
(7/16"wrench) on the stud must be tightened onto
the track while holding the stud with a pliers. After
adjusting the track height trim excess cable as
needed.
NOTE for both supports: Placing track at the proper elevation (this could be an angle for a sloped
ceiling) and straightness is critical for a good installation.
5
U-Bolt Track Support Option OR Pool Applications
A roll of cable, U-bolts,
square nuts for U-bolts,
regular nuts for U-bolts
and cable clamps are
supplied. Length from the
ceiling support and the
top of the track needs to
be determined by installer.
A cable loop is created
at the top of the cable
length by a cable clamp.
Be sure the installed
cable does not contact
any sharp edges; for
example, loop the cable
through an eyebolt attached to the ceiling. Be sure
all of the threads of the square nuts are engaged
to the U-bolt. The square nuts on the end of the
U-bolt are slid into the top channel of the track.
After U-bolt and cable are in their proper location
the nuts (7/16"wrench) on the U-bolts must be
tightened onto the track. A cable loop is created at
the top of the track by the cable through the U-bolt
clamp. After adjusting the track height trim excess
cable as needed.
Standard
Pools
Installation Guide: U-Track