Anywave ATSC VHF 100W Hızlı Başlangıç Kılavuzu - Sayfa 11

Verici Anywave ATSC VHF 100W için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Anywave ATSC VHF 100W 17 sayfaları.

6. You are now ready to bring the TX up to power. To accomplish this, slowly

increase the drive level out of the Exciter by increasing the POWER setting in

the Exciter RF submenu while watching the PA_Fwd power increase

accordingly on the PAC submenu (you will need to navigate between the Exciter

RF and PAC submenus), or the PA's touchscreen, and its Web Interface.

Begin to slowly raise the FWD System power by using the UP button on

the Exciter, while monitoring the PA_Fwd system power meter on the

Controller HOME screen as shown below.

ACT-PAVIII1-QSG-DOC-V1.1, 06/26/2018

ATSC VHF 100W Quick Start Guide

Page 11 of 17

Slowly increase

to raise FWD

SYS POWER

Monitor FWD

SYS POWER