Anywave ATSC VHF 100W Посібник із швидкого старту - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Передавач Anywave ATSC VHF 100W. Anywave ATSC VHF 100W 17 сторінок.

Друкувати сторінку
6. You are now ready to bring the TX up to power. To accomplish this, slowly
increase the drive level out of the Exciter by increasing the POWER setting in
the Exciter RF submenu while watching the PA_Fwd power increase
accordingly on the PAC submenu (you will need to navigate between the Exciter
RF and PAC submenus), or the PA's touchscreen, and its Web Interface.
Begin to slowly raise the FWD System power by using the UP button on
the Exciter, while monitoring the PA_Fwd system power meter on the
Controller HOME screen as shown below.
ACT-PAVIII1-QSG-DOC-V1.1, 06/26/2018
ATSC VHF 100W Quick Start Guide
Page 11 of 17
Slowly increase
to raise FWD
SYS POWER
Monitor FWD
SYS POWER