Duerkopp Adler 550-12-12 Kullanım Talimatları Kılavuzu - Sayfa 14

Dikiş Makinesi Duerkopp Adler 550-12-12 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Duerkopp Adler 550-12-12 15 sayfaları.
Ayrıca Duerkopp Adler 550-12-12 için: Kurulum Talimatları Kılavuzu (6 sayfalar)

Sayfayı Yazdır

Duerkopp Adler 550-12-12 Kullanım Talimatları Kılavuzu

3.2 Lubricating

For lubricating the machine use only ESSO SP-NK 10 lubricating oil.

SP-NK 10 is available from the DÜRKOPP ADLER AG sales offices.

Checking the oil level in the hook drive housing

–

The oil level in the hook drive housing 2 should not fall below the

lower, long marking line on the viewing glass when the machine is

tilted to the back.

–

If necessary, fill oil to the upper marking line.

For this screw out the oil fill screw 1.

Checking the oil level in the reservoir

The reservoir 3 supplies all bearing positions of the machine except

for the hook drive via a central oil wick lubrication.

–

The oil level in the reservoir 3 should not fall below the "Min" mark

with the machine head upright.

–

If necessary, fill oil through the holes in the viewing glass up to the

"Max" mark.