Duerkopp Adler 0791 911703 Montaj Talimatları Kılavuzu - Sayfa 18
Monitör Duerkopp Adler 0791 911703 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Duerkopp Adler 0791 911703 20 sayfaları. Remaining thread monitor
Sayfayı Yazdır
Fitting Instruction for Remaining Thread Monitor
3.3 Operating and function sequence
Ausgabe/Edition:
Änderungsindex
03.2011
Rev. index: 00.0
Anbauanleitung Restfadenwächter
Teilesatz 0911 597754
Kit 0911 597754
Prerequisite:
The bobbin has to be inserted in the hook with the groove A
pointing downwards.
After the detection: "Bobbin almost empty, only certain residual
thread left":
The control panel will display the follwing: "Event code: 3220"
The request "Continue sewing" has to be confirmed with either
"OK" or "Cancel".
–
Selection "OK" (with a short segment to be sewn left):
The sewing program will be completed. After the thread
trimming the following message will appear on the display:
"Bobbin empty" / "Insert a full bobbin"
–
The regular bobbin change has to be carried out.
–
Selection "Cancel" (with long segments left to be sewn):
Thread trimming will occur; afterwards the control changes to
the repair mode.
–
The regular bobbin change has to be carried out.
–
Afterwards finish the seam segment left in repair mode.
Printed in Germany
Teile-Nr./ Part-No.:
0791 911703
Blatt:
von
Sheet: 18 from 20