Duerkopp Adler 0791 911703 Інструкція з монтажу Інструкція з монтажу - Сторінка 18
Переглянути онлайн або завантажити pdf Інструкція з монтажу Інструкція з монтажу для Монітор Duerkopp Adler 0791 911703. Duerkopp Adler 0791 911703 20 сторінок. Remaining thread monitor
Друкувати сторінку
Fitting Instruction for Remaining Thread Monitor
3.3 Operating and function sequence
Ausgabe/Edition:
Änderungsindex
03.2011
Rev. index: 00.0
Anbauanleitung Restfadenwächter
Teilesatz 0911 597754
Kit 0911 597754
Prerequisite:
The bobbin has to be inserted in the hook with the groove A
pointing downwards.
After the detection: "Bobbin almost empty, only certain residual
thread left":
The control panel will display the follwing: "Event code: 3220"
The request "Continue sewing" has to be confirmed with either
"OK" or "Cancel".
–
Selection "OK" (with a short segment to be sewn left):
The sewing program will be completed. After the thread
trimming the following message will appear on the display:
"Bobbin empty" / "Insert a full bobbin"
–
The regular bobbin change has to be carried out.
–
Selection "Cancel" (with long segments left to be sewn):
Thread trimming will occur; afterwards the control changes to
the repair mode.
–
The regular bobbin change has to be carried out.
–
Afterwards finish the seam segment left in repair mode.
Printed in Germany
Teile-Nr./ Part-No.:
0791 911703
Blatt:
von
Sheet: 18 from 20