Duevi EZY-LAN Manuel - Sayfa 3

Güvenlik Sistemi Duevi EZY-LAN için çevrimiçi göz atın veya pdf Manuel indirin. Duevi EZY-LAN 12 sayfaları. Wireless alarm panel with ethernet + wi-fi + gsm + lte
Ayrıca Duevi EZY-LAN için: Kullanıcı Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (5 sayfalar)

Sayfayı Yazdır

Manual settings

To enter the manual settings (virtual dip-switches)

proceed as follows:

1. With the control panel disarmed, press the

PRT button (12) for 3 seconds to enter the

settings

2. The control panel emits 3 beeps and positions

itself on the first function indicated by the

flashing LED (1)

3. The LED ring (6) indicates the setting of the

selected function with a different color

GREEN = function enabled

RED = function disabled

4. To change the function setting, briefly press

the central button (5)

5. To advance to the next function, briefly press

the PRT button (12) and the next LED will flash

Function

Description

Enabled (GREEN LED)

access with APP requires only

the username, without

Function 1

password.

INSTALLER access is always

Led 1

enabled.

Disabled (RED LED)

Web access

access with APP requires both

without

username and password.

password

INSTALLER access is enabled

and disabled by an

Administrator user.

Enabled (GREEN LED)

The Wi-Fi is set in Access Point

mode, i.e. it is possible to

connect with a PC, tablet or

phone directly to the Wi-Fi

integrated in the control panel.

The control panel automatically

Function 2

assigns an IP to the device that

connects in DHCP.

Led 2

Wi-Fi name = EzyLan_<serial>

Wi-Fi Access

Password = 12345678

Point Mode

Security = WPA2 / WPA1 / PSK

Disabled (RED LED)

The Wi-Fi is set to connect to a

Wi-Fi router. The parameters

for the connection must be set

by software.

6. To exit the settings and save the changes,

press and hold the PRT button (12) until a long

beep is heard.

7. To exit the settings without saving the

changes, do not press any button for 10 sec,

the control panel will automatically exit the

settings with a long beep.

Programming of the control panel

The control panel can be programmed only using

the dedicated application "DUEVI Connect",

available for Windows, IOS and Android systems.

Once the software has been installed on the

device used for programming:

•

update graphical interfaces

•

add the control panel with local search or via

QRCODE

The panel, resetted at factory conditions, only can

be programmed through one of the following

network connections:

•

connection via direct cable Ethernet

•

connection via Ethernet local network

•

direct Wi-Fi connection in Access Point mode

Access Point factory settings:

Name= EzyLan_<serial>

Password= 12345678

10 Homepage (INFO)

Access the control panel as USER INSTALLER

User name = installer

Password = admin (by default is disabled)

As soon as you log in, the main screen

(homepage) will open, which displays a series of

information about the control panel:

•

System – Summary of the main programmed

elements

•

Connections – Indication of the status of the

various connections. By pressing the icon

(info), more details are displayed

•

Power – Indications on the power supply and

battery of the control panel

The homepage also contains two buttons:

•

ENTER SETUP – Allows to enter the setup

mode (programming) of all the parameters of

the control panel. In setup mode the control

panel is not operational and does not accept

commands from the user.

•

ENTER TEST – Allows to enter system test

mode. In test mode the control unit is not

operational and does not accept commands

from the user.

•

From any page, you can return to the homepage

by pressing the icon

FIRMWARE UPDATE: Before starting

programming it is advisable to check if a

Firmware update is available [see section

"Devices (SETUP)"]

(house).