Dulytek DHP5-E Kullanım Kılavuzu - Sayfa 10

Elektrikli Alet Dulytek DHP5-E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dulytek DHP5-E 15 sayfaları.

INSTRUCTION MANUAL: DHP5

OPERATING INSTRUCTIONS

SETTING

CONTROL

PANEL

(continued)

PRESSING

Dulytek Equipment

www.dulytek.com

Fig. 5

9. Press Set button once more (Fig. 9) to record all control panel's

settings. The platens start heating, and the heating icons are now displayed

on the screen (Fig. 10).

Fig. 9

1. Wait until the platens heat up to the desired temperature (Fig. 11). Tip:

Once heating is finished, the heating icons are turned off.

2. Place the prepared material in the center of the bottom platen

3. Pump the jack handle

pumping until the desired pressure is reached. Release the handle.

4. Press TIMER button on the control panel to start the countdown (Fig.

12). The countdown is now shown on the lower line of the display.

5. Wait until the countdown ends and the press starts beeping.

6. Press TIMER button again to turn off the timer and stop beeping.

7. Turn the valve knob

the bottom platen

8. Remove the pressed material using heat resistant gloves or tools and

exercising extreme caution.

(continued)

Fig. 6

Fig. 10

to move the bottom platen

counterclockwise to release the press and lower

Fig. 7

Fig. 11

up. Continue

PAGE 9

Fig. 8

Fig. 12