Dumor EASYBINDER 80 Kullanıcı Kılavuzu - Sayfa 6

Ciltleme Makinesi Dumor EASYBINDER 80 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dumor EASYBINDER 80 10 sayfaları.

(d)

Apparent error

The cover is rounded.

(d)

Real cause

- The cover is too thick for the paper block and needs to be pre- creased to wrap correctly.

- Too much glue on the spine.

- Press height too low.

Apparent error

Cover is not centred on the book block.

Real cause

(e)

- Make sure the clips are set correctly.

- Make sure the cover is places square on the press.

(e)

(f)

- Make sure the end of travel adjustment on the carriage is correctly set.

Apparent error

Glue is spilling over the ends of the spine.

Real cause

- Glue cut off not set correctly.

- Too thick a glue strip.

(f)

Apparent error

Glue is not applied evenly across the spine, un-evenness /holes in the glue strip.

Real cause

- The glue is too old and has become too thick.

- The tank is not at the right temp for the glue , check the glue running temp spec.

- The glue level is too low.

- There are bits of paper in the glue that cause it to cavitate.