Danfoss FH-CWP Kullanım Kılavuzu - Sayfa 4

Termostat Danfoss FH-CWP için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Danfoss FH-CWP 20 sayfaları.

2. Mounting

Placing the Room Thermostat - fig. 4 

! Wherever possible, the room thermostat should be

installed where the effects of sunlight, draught, and

other heaters (eg. TV's), etc. are avoided.

Installing the Room Thermostat- fig. 5 and fig. 6

• Remove the connection cable between front and

back part.

• Connect the thermostat correctly to mains supply

according to the Wiring Diagram - fig 6.

• Mount the thermostat by using the enclosed

screws to the wall box.

• Mount the front correctly.

Wiring Diagram – fig 6

The product must be connected to the following

leads:

• Term L:

• Term NO:

• Term NC:

• Term N:

• Term 2:

• Terminal S2:

• Terminal S1:

VI.CU.C2.02

Instruction FH-CWP Thermostat

Phase (L) AC85-250V, 50/60 Hz

Valve (NO)

Valve (NC)

Neutral (N)

Empty

Floor sensor

Produced by Danfoss Floor Heating Hydronics 05.2011