Danfoss living connect Kurulum ve Kullanım Kılavuzu - Sayfa 7
Termostat Danfoss living connect için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Danfoss living connect 20 sayfaları. Z-wave certified electronic radiator
thermostat
Ayrıca Danfoss living connect için: Kurulum ve Kullanım Kılavuzu (16 sayfalar), Veri Sayfası (8 sayfalar)
Sayfayı Yazdır
3. Installation - step by step
3.3 Configuring Danfoss Link™ CC
UK
For practical reasons, it is recommended that the Danfoss Link™ CC
is connected to a battery pack (014G0262). This makes the device
mobile, and it can then easily be positioned at a distance of up
to 1.5 m from each radiator thermostat that is to be added to
the system.
Remove the front cover from the Danfoss Link™ CC by carefully
levering it off, starting with the bottom corners. Press and hold
down the setup button using a ballpoint pen for approximately
three seconds to start the installation menu (the start-up phase
may take several minutes).
For Help, press ? in the lower right corner.
For installation without a battery pack, please see
www.danfoss.com/living
Danfoss Heating Solutions
7