Danfoss REP24CO1 Kullanıcı Talimatları - Sayfa 4
Termostat Danfoss REP24CO1 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Danfoss REP24CO1 12 sayfaları. Electronic proportional heat / cool thermostat
Sayfayı Yazdır
Product overview
GB
This thermostat is designed for fan coil and chilled beam
applications alongside proportional valves and actuator systems
where a 0-10v proportional control output is required.
The thermostat also has a single speed fan output.
The operational mode of the fan (auto or continuous) is selected
at time of installation via DIL switches accessible on the rear of
the unit.
When the unit is in standby the fans are switched off .
Installation
First remove the wallplate from the back of the unit.
Fix at a height of approximately 1.5m from the fl oor, away
from draughts or heat sources such as fan-coil outlets,
sunlight or offi ce equipment.
Wiring
4