Danfoss 176F4169 Kurulum Kılavuzu - Sayfa 6

Medya Dönüştürücü Danfoss 176F4169 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Danfoss 176F4169 10 sayfaları. In-back/out-back cooling kit for fk11/fb11 and fk12/fb12, frequency converters

Sayfayı Yazdır
In-back/Out-back Cooling Kit for FK11/FB11 and FK12/FB12
Installation Guide
2.5 Installing the Bottom Cover (Before Pedestal)
Use the following steps to install the bottom cover before attaching the pedestal. See
Procedure
1.
Remove paper backing from the bottom gasket.
2.
Adhere the bottom gasket to the upper side of the bottom cover.
3.
Position the bottom cover and gasket over the opening at the lower end of the cooling channel.
4.
Secure the bottom cover using the M5x14 screws (T25) provided with the kit.
Torque screws to 2.3 Nm (20 in-lb). FK11/FB11 frequency converters require 8 screws; FK12/FB12 frequency converters
require 10 screws.
Illustration 4: Installation of Bottom Cover and Pedestal
1
Cooling channel
2
Bottom gasket
3
Bottom cover
6 | Danfoss A/S © 2022.08
Illustration
4.
4
M5x14 screw
5
Pedestal
6
M10x30 fastener
AN361429087579en-000101 / 136R0289
Installation
1
2
3
4
5
6