Casio fx-7400G PLUS Kullanım Kılavuzu - Sayfa 4

Hesap Makinesi Casio fx-7400G PLUS için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Casio fx-7400G PLUS 13 sayfaları. Chapter 9 - data communications
Ayrıca Casio fx-7400G PLUS için: Ürün Kataloğu (16 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Teknik Özellikler (1 sayfalar), Teknik Özellikler (1 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Ekler (15 sayfalar), Kullanma (2 sayfalar)

Chapter 9

Data Communications

166

3. Connecting the Unit with a CASIO

Label Printer

After you connect the unit to a CASIO Label Printer with an optional SB-62 cable,

you can use the Label Printer to print screen shot data from the unit. See the user's

guide that comes with your Label Printer for details on how to perform this operation.

• The operation described above can be performed using the following Label Printer

models: KL-2000, KL-2700, KL-8200, KL-8700 (as of February 2002).

u u u u u To connect the unit with a Label Printer

1. Check to make sure that the power of the unit and the Label Printer is off.

2. Connect the optional SB-62 cable to the Label Printer.

3. Remove the cover from the connector of the unit.

• Be sure you keep the connector cover in a safe place so you can replace it after

you finish your data communications.

4. Connect the other end of the SB-62 cable to the unit.

5. Turn on the power of the unit, followed by the Label Printer.

• After you finish data communications, turn off power in the sequence: the unit

first, and then the Label Printer. Finally, disconnect the equipment.

Label Printer

SB-62 cable