Free The Tone CW-1Y Kullanıcı El Kitabı - Sayfa 6

Müzik Pedalı Free The Tone CW-1Y için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Free The Tone CW-1Y 10 sayfaları. Multiple filtering delay

Sayfayı Yazdır

Edit Menu

The parameter for each preset is edited in Edit mode.

How to Change or Confirm Parameter Setting

1. Press the HOME switch to shown the HOME screen or Operation Screen 1, 2 or 3.

2. Press the cursor right ▶ key to show the Edit screen.

3. Use the cursor left ◀ or right ▶ key to select the function to be edited.

4. Turn the DELAY TIME (PARAM) encoder to change the parameter.

5. After confirmation or edit, press the HOME switch. The display returns to the HOME screen.

NOTE

For complete list of Edit menu items, refer to Edit Menu Flowchart on p.16.

Functions in Edit Screen

①

COSMIC MODE

Set the cosmic mode. You can choose from 5 different settings of Cosmic Filter.

Selecting Cosmic Mode E to reflect the COSMIC E: gain and frequency settings saved in the global settings.

Parameter OFF (default), A, B, C, D, E

②

EFFECT BITS

Adjusts the number of output bits for delay sound in the range of 8-bit to 24-bit. The larger the number of bits,

the more faithfully the sound will be output to the signal processed by the DSP. On the other hand, as the

number of bits decreases, it becomes impossible to output with fidelity, and the delay component with a low

volume is output as noise.

Parameter 8-24 (default value: 24 BITS)

③

BAND PASS FILTER

Selects the band-pass filter from five types.

Parameter OFF (default), 40-18k, 50-15k, 60-12k, 60-9k, 60-2k

④

REVERSE DELAY

Turns the reverse delay on or off. Select [ON w/DRY] (both the original and reverse delay sounds are output) or

[ON woDRY] (only the reverse delay sound is output.

Parameter OFF (default), ON with DRY, ON without DRY

⑤

TRAIL

Selects whether the delay sound is retained or not when the effect is turned on/off or when the preset is

changed. If the FEEDBACK value set to higher than 90, the unit automatically decreases the feedback amount to

lower the delay sound volume gradually.

Parameter OFF (default), ON

⑥

Assignment Setting of EXP/CV/FS Terminal (EXP/FS ASSIGN)

COSMIC WAVE can assign a function to its EXP/CV/FS terminal. Press the cursor ▶ key until the display

indicates the Assignment Setting screen. Then turn the DELAY TIME(PARAM) encoder to select the function

to be assigned.

NOTE

For the functions assignable to the EXP/CV/FS terminal, refer to the separate table (Assignable Functions on p. 19).

Setting Usage of External Footswitch for Selecting whether to Output the Input Signal (Dry Sound) or not

An external footswitch (momentary type) connected to the EXP/CV/FS terminal can be used to select whether to

output (ON) the input signal or not (OFF).

1. Press the cursor ▶ key to show the EXP/FS ASSIGN screen.

2. Turn the DELAY TIME (PARAM) encoder to select DRY ONOF.

3. Press the HOME switch. The display changes to the HOME screen.

NOTE

When the effect is activated, the dry sound can be turned on/off by operating an external footswitch.

To save the changed setting in a preset, refer to "How to Edit Parameter Setting and Save to Preset" on p. 7.

⑦

PRESET NAME - Naming Presets

Each preset can be named.

A character can be inserted at the cursor position (inverted display). Press the ◀/▶ cursor key to move the

insertion point. Turn the DELAY TIME (PARAM) encoder to select the desired character. To delete a character,

press the PRESET footswitch once: the character at the cursor position is deleted and the entire label is shifted

leftward. To enter a character, press the ON/OFF footswitch once. A space is inserted and the entire label after

the cursor position is shifted rightward. After entering/editing the preset name press the SAVE switch to save it.

Or to cancel the operation, press the HOME switch or turn any knob.