AudioControl ACX-600.6 Hızlı Başlangıç Kılavuzu - Sayfa 3
Amplifikatör AudioControl ACX-600.6 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AudioControl ACX-600.6 12 sayfaları. Compact high power all-weather 6-channel amplifier
Sayfayı Yazdır
Connections & Control Panel Features
1
2
3
1. Speaker Outputs –
In Stereo operation, connect one loudspeaker to each channel as
shown. The minimum impedance is 2 Ohms per channel.
In Bridged Mono operation, connect one loudspeaker to the
outer 2 wires - White(+) and Grey/Black(-) for output 1/2, Green(+)
and Purple/Black(-) for output 3/4, and Blue (+) and Brown/Black(-)
for output 5/6. The mono loudspeaker will be powered by each
channel, and both input channels must be fed a signal. The mini-
mum impedance is 4 Ohms.
2. Power Input Terminal +12V & Ground – Connect these wires
to the +12V and Negative binding posts of the vehicle battery
via one of two included harness options. You may use either the
included water resistant harness, or the included harness kit to
terminate your own custom-length water-resistant harness. Use
quality insulated wiring of the recommended wire gauge, such as
wire gauge 8 or thicker.
3