AudioControl LC7i Manuel - Sayfa 5
Medya Dönüştürücü AudioControl LC7i için çevrimiçi göz atın veya pdf Manuel indirin. AudioControl LC7i 16 sayfaları. Six channel line output converter with accubass for interfacing with factory installed audio systems
Sayfayı Yazdır
"Defeat". In this mode, you will need signal on the Channel 3
inputs to output signals on the Channel 3 output. We ship the LC7i
with the jumpers in the "On" position. See the "AutoMode Input"
section under "More Highlights" on page 8 for more details.
Internal Jumper Configuration
A Guided Tour of LC7 i
Speaker-level Inputs: The LC7i has six speaker-level inputs.
These inputs get their signals from the speaker-level outputs of
your factory-installed source unit or amplifier. If your source unit
has front, rear, and subwoofer speaker-level outputs, connect them
to the three sets of inputs on your LC7i. If the source unit only has
front and rear outputs, the AutoMode circuitry in your LC7i auto-
matically routes the Channel 2 signal to the Channel 3 (subwoofer)
output.
The GTO™ circuit, mentioned previously, monitors the main
speaker inputs for the presence of signal. If your installation does
not use the main speaker inputs GTO™ will not function.
page 5