Conqueror FBC200 Kullanıcı Kılavuzu - Sayfa 12

Garaj Kapısı Açıcı Conqueror FBC200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Conqueror FBC200 18 sayfaları.

GARAGE DOOR OPERATOR USER'S MANUAL

Deleting stored transmitters

1. Press and hold CODE , ' Su ' is indicated on the LED display.

2. Do not release the button until ' dL ' flashes.

3. ' ▬ ▬ ' is indicated on the LED display, this indicates that all stored transmitters have been

deleted completely.

1. Press and hold SET four seconds until 'P1' is indicated on the LED display. The operator is

now in programming mode.

2. Press SET again, 'OP' is indicated on the LED display.

3. Press and hold UP to set the open limit, 'OP' on the LED display will flash, release the

button until the door has reached desired position.

4. Press SET to confirm the open limit position, the LED will now indicated the 'CL'.

5. Press and hold DOWN to set the close limit, 'CL' on the LED display will flash, release the

button until the door has reached desired position.

6. Press SET to confirm the close limit position.

7. The door will now do a complete open & close cycle.

Press the transmitter

button twice.

Fig.14

Fig.15