aevit VIC 2.0 Kurulum ve Kullanım Kılavuzu - Sayfa 14

Kontrol Ünitesi aevit VIC 2.0 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. aevit VIC 2.0 17 sayfaları. Voice interactive controls

Sayfayı Yazdır

5. OperATION

VIC 2.0 OperATION

OperATION STep 1

When training is completed, boot down the AEVIT 2.0 system as described in the Operation and Pro-

gramming Manual. Boot up the system by pressing the Wake-Up button and press the Accept Button.

VIC 2.0 will say, "You now have voice activation" which means you can now operate the (17) functions

listed on page 1-1.

OperATION STep 2

In order to operate the normal functions, simply press the Listen Switch wait for the "beep" and say

the command as close to the way it was trained as possible and the system will execute the function.

For example, if you wish for the VIC 2.0 volume to be LOUDER:

Press the Listen Switch:

BEEP

(wait one second)

Client: "Louder"

VIC 2.0: "Louder recognized"

The VIC 2.0 system's volume will then become louder.

There are six (6) critical functions that VIC 2.0 will require confirmation from the client before execut-

ing the commands. These are called Confirmation Functions. They are: PARK, REVERSE, NEUTRAL,

DRIVE, START, and STOP. When the client wishes to execute one of these commands, they will have to

repeat the command to VIC 2.0 before the system will execute the command. For example, with the

ignition on and the engine running, if the client wishes to shift the vehicle from PARK to DRIVE:

(The brake pedal must be depressed)

Press the Listen Switch:

BEEP

(wait one second)

Client: "Drive"

VIC 2.0: "Please confirm, drive"

Client: "Drive"

VIC 2.0: "Drive recognized"

The AEVIT 2.0 system will shift the vehicle into

drive.

VIC 2.0

5-1

VIC 2.0 INSTALL MANUAL