aevit VIC 2.0 Handbuch für Installation und Betrieb - Seite 14
Blättern Sie online oder laden Sie pdf Handbuch für Installation und Betrieb für Kontrolleinheit aevit VIC 2.0 herunter. aevit VIC 2.0 17 Seiten. Voice interactive controls
Seite drucken5. OperATION
VIC 2.0 OperATION
OperATION STep 1
When training is completed, boot down the AEVIT 2.0 system as described in the Operation and Pro-
gramming Manual. Boot up the system by pressing the Wake-Up button and press the Accept Button.
VIC 2.0 will say, "You now have voice activation" which means you can now operate the (17) functions
listed on page 1-1.
OperATION STep 2
In order to operate the normal functions, simply press the Listen Switch wait for the "beep" and say
the command as close to the way it was trained as possible and the system will execute the function.
For example, if you wish for the VIC 2.0 volume to be LOUDER:
Press the Listen Switch:
BEEP
(wait one second)
Client: "Louder"
VIC 2.0: "Louder recognized"
The VIC 2.0 system's volume will then become louder.
There are six (6) critical functions that VIC 2.0 will require confirmation from the client before execut-
ing the commands. These are called Confirmation Functions. They are: PARK, REVERSE, NEUTRAL,
DRIVE, START, and STOP. When the client wishes to execute one of these commands, they will have to
repeat the command to VIC 2.0 before the system will execute the command. For example, with the
ignition on and the engine running, if the client wishes to shift the vehicle from PARK to DRIVE:
(The brake pedal must be depressed)
Press the Listen Switch:
BEEP
(wait one second)
Client: "Drive"
VIC 2.0: "Please confirm, drive"
Client: "Drive"
VIC 2.0: "Drive recognized"
The AEVIT 2.0 system will shift the vehicle into
drive.
VIC 2.0
5-1
VIC 2.0 INSTALL MANUAL