aevit VIC 2.0 Kurulum ve Kullanım Kılavuzu - Sayfa 5
Kontrol Ünitesi aevit VIC 2.0 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. aevit VIC 2.0 17 sayfaları. Voice interactive controls
Sayfayı Yazdır3. INSTALLATION
VIC 2.0 INSTALLATION
INSTALLATION STep 1
Install the VIC 2.0 CPU Unit behind the center console
area within eight (8) feet of both the AEVIT 2.0 Chassis and
the Vehicle Interface Module (VIM) so the CAN Bus cable
can reach.
INSTALLATION STep 2
EMC requires that VIC 2.0 be secured with at least (2) ¼-20 bolts with lock nuts. EMC also recom-
mends that the EMC technician fabricate a mounting plate with (2) ¼-20 studs for VIC 2.0 and weld
the mounting plate into the vehicle. This will allow for easy installation and doesn't require drilling
thru the firewall of the vehicle.
INSTALLATION STep 3
Connect VIC 2.0 CpU to the AEVIT CAN Bus using the
provided AEVIT CAN Bus cable. The top connection will
typically come from the AEVIT 2.0 Chassis and the bottom
will go to the Vehicle Interface Module.
FOR THE FOLLOWING STEPS 4-10 REFER TO THE DIAGRAM ON PAGE 2-1 FOR FURTHER
INFORMATION ON WIRE COLORS AND EMC CONNECTOR LOCATIONS.
NOTE:
To AEVIT 2.0
Chassis
To Vehicle
Interface Module
VIC 2.0 INSTALL MANUAL
VIC 2.0
3-1