aevit VIC 2.0 Manuel d'installation et d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} aevit VIC 2.0. aevit VIC 2.0 17 pages. Voice interactive controls

Imprimer la page

3. INSTALLATION

VIC 2.0 INSTALLATION

INSTALLATION STep 1

Install the VIC 2.0 CPU Unit behind the center console

area within eight (8) feet of both the AEVIT 2.0 Chassis and

the Vehicle Interface Module (VIM) so the CAN Bus cable

can reach.

INSTALLATION STep 2

EMC requires that VIC 2.0 be secured with at least (2) ¼-20 bolts with lock nuts. EMC also recom-

mends that the EMC technician fabricate a mounting plate with (2) ¼-20 studs for VIC 2.0 and weld

the mounting plate into the vehicle. This will allow for easy installation and doesn't require drilling

thru the firewall of the vehicle.

INSTALLATION STep 3

Connect VIC 2.0 CpU to the AEVIT CAN Bus using the

provided AEVIT CAN Bus cable. The top connection will

typically come from the AEVIT 2.0 Chassis and the bottom

will go to the Vehicle Interface Module.

FOR THE FOLLOWING STEPS 4-10 REFER TO THE DIAGRAM ON PAGE 2-1 FOR FURTHER

INFORMATION ON WIRE COLORS AND EMC CONNECTOR LOCATIONS.

NOTE:

To AEVIT 2.0

Chassis

To Vehicle

Interface Module

VIC 2.0 INSTALL MANUAL

VIC 2.0

3-1