Constellation audio Inspiration INTEGRATED 1.0 Kullanıcı El Kitabı - Sayfa 9

Amplifikatör Constellation audio Inspiration INTEGRATED 1.0 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Constellation audio Inspiration INTEGRATED 1.0 16 sayfaları.

Sayfayı Yazdır

Controls / displays / indicators

10 - 16. Front panel controls

The front panel includes an LCD touchscreen and two knobs plus five buttons positioned underneath the dis-

play. These buttons allow you to control the Inspiration Integrated without its remote. The functions of the but-

tons are shown using icons on the touchscreen. Here are the functions of the buttons and knobs:

10. Balance

This knob adjusts left-to-right balance when an input screen is displayed—i.e., when an input is selected. Turn

the knob counterclockwise to shift the balance to the left, clockwise to shift the balance to the right. An onscreen

indicator will indicate if the balance is centered or how far it is shifted to one side or the other.

11. Volume

The volume control is always active when the Inspiration Integrated is powered up and the mute is deactivated.

Note that the control is calibrated in negative decibels (-dB), reaching maximum volume at 0.0 dB and minimum

at -99.0 dB. Thus, when you turn the volume up (clockwise), the number on the front display will decrease.

When you turn the volume down (counterclockwise), the number will increase. The adjustments steps are in 1

dB increments between -99.0 dB and -50.0 dB, and 0.5 dB increments from -49.5 dB to 0.0 dB.

12. Home

This button brings you to the input select screen no matter which control screen you are currently viewing.

13. Return/back

This button brings you back to the previous control screen. For example, from any input's screen, such as XLR 1,

it will take you back to the input selector screen.

14. Standby/power

Push this button to turn the Inspiration Integrated on and off. When you turn the unit on, it will take a few sec-

onds for the unit to warm up. When it is ready for use, its LCD screen will show the most recently selected input.

To put the unit in Standby mode, press this button again after turning on the power.

Hold this button down for 5 seconds to turn the Inspiration Integrated off. The unit will enter cool-down mode

for 10 seconds. During cool-down, no buttons on the unit or remote will operate.