Constellation audio Inspiration INTEGRATED 1.0 Kullanıcı El Kitabı - Sayfa 11

Amplifikatör Constellation audio Inspiration INTEGRATED 1.0 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Constellation audio Inspiration INTEGRATED 1.0 16 sayfaları.

Sayfayı Yazdır

Remote control

The remote operates the basic functions of the Inspiration Integrated. It does not operate Constellation source

devices, such as the Perseus phono preamp and the Cygnus digital file player.

18. Standby

Push this button to turn the Inspiration

Integrated on and off. When you turn the

unit on, it will take a few seconds for the

unit to warm up. When the amp is ready

for use, its LCD screen will show the most

recently selected input. To put the unit in

Standby mode, press this button again

after turning on the power.

Hold this button down for 5 seconds to

turn the integrated amp off. The unit will

enter cool-down mode for 10 seconds.

During cool-down, no buttons on the unit

or remote will operate.

19. Mute

Press this to button to silence the Inspira-

tion Integrated temporarily. The numeri-

cal volume readout will flash. Press again

to restore the audio. Because the Inspira-

tion Integrated uses a relay to perform the

mute function, it may take a second or so

for this control to respond.

20. Volume up/down

Press these buttons to raise or lower the volume. Each press changes volume by 1 dB at volumes below -50.0 dB,

and 0.5 dB at volumes above -50.0 dB. Holding the buttons down raises or lowers the volume quickly.

21. Balance left/right

Press these buttons to shift the balance to the left or right. Each press changes the balance by 0.1 dB.

22. Input

Press this button to select among the Inspiration Integrated's XLR and RCA inputs. You will have to wait a sec-

ond or so between pushes of this button, because for best sound quality the Inspiration Integrated uses relays to

switch inputs.

23. Headphones

Push this to activate the headphone output. This will mute the sound from the speakers. To restore the sound in

the speakers, push the headphones button again.