Belimo FS Series Talimatlar Kılavuzu - Sayfa 12

Motor Belimo FS Series için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Belimo FS Series 20 sayfaları. Replacement of multiproducts motors
Ayrıca Belimo FS Series için: Değiştirme (19 sayfalar), Talimat Sayfası (18 sayfalar)

Sayfayı Yazdır

Mounting

Short shaft

Note that actuator floats freely. Clamp cold welds when teeth dig into the damper shaft and

the anti-rotation strap stud allows the actuator to move if shaft is not perfectly concentric.

Rigid mounting by jamming the stud into the U-slot of actuator is NOT usually best.

USE CAUTION!

Spring is under high torsion and may cause serious injury! If any external

springs are present, exercise caution – wear face and hand protection

Read Data Sheet provided in box with each actuator for specific wiring details.

Greenheck MP2985 & MP2986 Motors with Belimo FSxx Series

For short shaft mounting, the

ZG-LMSA-1/2-5 can be used.

Alternately, the clamp can be

installed between the actuator

and sheet metal.

FSLF mounted on the

damper shaft. Two

sheet metal screws hold

the anti-rotation strap.

Two nuts secure cold-

weld clamp onto shaft.

WARNING!

Clamp

January 2015