Aewin SCB-6971 Kullanıcı Kılavuzu - Sayfa 17

Ağ Donanımı Aewin SCB-6971 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aewin SCB-6971 20 sayfaları. Desktop amd geode lx800 network appliance with four lan or three lan and four switch, mini pci

Sayfayı Yazdır

Chapter 3 BIOS Setup

The ROM chip of your SCB-6971 board is configured with a customized Basic

Input/Output System (BIOS) from Phoenix-Award BIOS. The BIOS is a set of

permanently recorded program routines that give the system its fundamental

operational characteristics. It also tests the computer and determines how

the computer reacts to instructions that are part of programs.

The BIOS is made up of code and programs that provide the device-level

control for the major I/O devices in the system. It contains a set of routines

(called POST, for Power-On Self Test) that check out the system when you turn

it on. The BIOS also includes CMOS Setup program, so no disk-based setup

program is required CMOS RAM stores information for:

Date and time

Memory capacity of the main board

Type of display adapter installed

Number and type of disk drives

The CMOS memory is maintained by battery installed on the SCB-6971 board.

By using the battery, all memory in CMOS can be retained when the system

power switch is turned off. The system BIOS also supports easy way to

reload the CMOS data when you replace the battery of the battery power lose.

3.1 Quick Setup

In most cases, you can quickly configure the system by choosing the following

main menu options:

1. Choose "Load Optimized Defaults" from the main menu. This loads the

setup default values from the BIOS Features Setup and Chipset Features

Setup screens.

2. Choose "Standard COS Features" from the main menu. This option lets

you configure the date and time, hard disk type, floppy disk drive type,

primary display and more.

3. In the main menu, press F10 ("Save & Exit Setup") to save your changes

and reboot the system.

AEWIN Technologies Co., Ltd

User's Manual

Aug, 2006