Aewin SCB-6971 Посібник користувача - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник користувача для Мережеве обладнання Aewin SCB-6971. Aewin SCB-6971 20 сторінок. Desktop amd geode lx800 network appliance with four lan or three lan and four switch, mini pci
Друкувати сторінкуChapter 3 BIOS Setup
The ROM chip of your SCB-6971 board is configured with a customized Basic
Input/Output System (BIOS) from Phoenix-Award BIOS. The BIOS is a set of
permanently recorded program routines that give the system its fundamental
operational characteristics. It also tests the computer and determines how
the computer reacts to instructions that are part of programs.
The BIOS is made up of code and programs that provide the device-level
control for the major I/O devices in the system. It contains a set of routines
(called POST, for Power-On Self Test) that check out the system when you turn
it on. The BIOS also includes CMOS Setup program, so no disk-based setup
program is required CMOS RAM stores information for:
Date and time
Memory capacity of the main board
Type of display adapter installed
Number and type of disk drives
The CMOS memory is maintained by battery installed on the SCB-6971 board.
By using the battery, all memory in CMOS can be retained when the system
power switch is turned off. The system BIOS also supports easy way to
reload the CMOS data when you replace the battery of the battery power lose.
3.1 Quick Setup
In most cases, you can quickly configure the system by choosing the following
main menu options:
1. Choose "Load Optimized Defaults" from the main menu. This loads the
setup default values from the BIOS Features Setup and Chipset Features
Setup screens.
2. Choose "Standard COS Features" from the main menu. This option lets
you configure the date and time, hard disk type, floppy disk drive type,
primary display and more.
3. In the main menu, press F10 ("Save & Exit Setup") to save your changes
and reboot the system.
AEWIN Technologies Co., Ltd
User's Manual
17
Aug, 2006