Apogee 11056017 Kullanım Kılavuzu - Sayfa 6

Ölçüm Cihazları Apogee 11056017 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Apogee 11056017 13 sayfaları. Blot transfer systems

4. After the wicking sheet is in position, place the tray insert into a UVT tray at 90 degrees to each

other so that the gel is centered between, but not touching, the rounded edges of the insert

tray. Again, be careful not to trap air pockets between the tray insert and the wicking sheet

(Figure 3). With a gel plate just center the gel on the wicking sheet and insert the tray.

5. Hold the UVT tray (or gel plate) and tray/insert assembly securely but gently together and invert

the entire assembly.

6. Carefully remove the UVT tray or gel plate, leaving the gel in place on the wicking sheet on the

now inverted insert tray (Figure 4).

Note: The wicking sheet runs over the insert tray legs.

Figure 3: Gel and wicking sheet on tray insert

Figure 4: Inverted insert tray

Apogee Electrophoresis | 101 Kane Street | Baltimore, MD 21224 USA | apogeephoresis.com