4DSP AD484 Kullanıcı Kılavuzu - Sayfa 12

Kontrol Ünitesi 4DSP AD484 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 4DSP AD484 20 sayfaları.

Sayfayı Yazdır
AD484 user manual
Figure 5: CPLD LED locations

3.2.3 JTAG

A JTAG connector is available on the AD484 for configuration purposes. The JTAG can also
be used to debug the FPGA design with the Xilinx Chipscope.
The JTAG connector is located on side 1 of the PCB in front (see Figure 6).
Figure 6: JTAG connector (J6) location
The JTAG connector pinout is as follows:
February 2007
Pin #
Signal
Signal
1
1.8V
TMS
2
GND
TDI
3
TCK
TDO
Table 5 : JTAG pin assignment
AD484 User manual
www.4dsp.com
Pin #
4
5
6
V1.2
- 12 -