APP SPEC Pak Montaj Talimatları - Sayfa 2
Raflar ve Standlar APP SPEC Pak için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. APP SPEC Pak 2 sayfaları. High power panel mount receptacle
Sayfayı YazdırStep 4 Insert Powerpole
•
With Hood up, slide Powerpole
right side, aligning the holder posts with the grove in Powerpole
•
Orient the remaining holder half with on the right side (See Figure 4)
•
Slide remaining half into the assembly, inserting the holder posts into the Powerpole
holes and aligning the tongues and grooves on the holder halves
Step 5 Install Receptacle housing on the panel:
•
Clean and dry the panel surface thoroughly
•
Orient housing with APP logo facing up
•
Sandwich panel mount receptacle gasket between the panel and the receptacle shell
(See Figure 5)
•
Secure the panel mount receptacle and gasket to the panel with size #10 or M5
screws (not included) in an alternating manner. Suggested Torque: 15-20 in-lbs (1.7-
2.2 N-M)
Step 6 Install crimped signal contacts into the holder and
crimped power contacts into the connector housings.
•
Pull wires through the panel
•
Orient the insert holder with the to the right (See Figure 6)
•
Snap the crimped signal contacts into the appropriate holes in the back of the holder
halves (See Figure 7). A tactile snap will be felt when contact is latched.
•
Insert crimped power contacts into the appropriate Powerpole® housing until the con-
tact lip snaps over the edge of the spring (See Figure 8)
•
Repeat until all power and/or signal contacts have been installed into the housing
Step 7 Install insert holder into the receptacle shell
•
Verify that the O-Ring is properly seated in the receptacle shell
•
Secure insert holder to the panel mount receptacle by tightening the screws in an
alternating manner. Torque: 13 in-lb (1.4 N-M)
Figure 7
REGISTRATION
"Anderson Power Products", "APP" are registered U.S. and foreign trademark of Anderson Power Products
PATENTS AND TRADEMARKS
HEADQUARTERS: Anderson Power Products®, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700
EUROPE: Anderson Power Products® Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 520203
ASIA / PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036
CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218
TAIWAN: IDEAL Anderson Asia Pacific Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460
SPEC Pak
High Power Panel Mount Receptacle
™
block into Powerpole
®
block into the holder half marked with on the
®
Latched
Contact
Figure 8
www.andersonpower.com
Page 2
Holder:
®
holes (See Figure 4)
®
®
, 213 Pratts Junction Road, Sterling, MA 01564-2305 USA www.andersonpower.com
®
Figure 4
Panel Hardware
Not Included
Figure 5
Sockets
Figure 6
Suggested Hood
Orientation for
Receptacle
Groove
Assembled Holder
Flatness
[ 0.002]
0.05
Gasket
Pins
14938
1S6555 REV 01