DURKOPP ADLER 867 Ek Talimatlar - Sayfa 9

Dikiş Makinesi Aksesuarları DURKOPP ADLER 867 için çevrimiçi göz atın veya pdf Ek Talimatlar indirin. DURKOPP ADLER 867 20 sayfaları. Remaining thread monitor
Ayrıca DURKOPP ADLER 867 için: Talimatlar Kılavuzu (16 sayfalar), Talimatlar (4 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Talimatlar Kılavuzu (8 sayfalar), Ek Talimatlar (18 sayfalar)

Sayfayı Yazdır

Assembling the remaining thread monitor

4. Set the position of the remaining thread monitor (1) so that the light

2.2 Connecting the remaining thread monitor

2.2.1 Connecting the remaining thread monitor on Classic

Fig. 2: Connecting the remaining thread monitor on Classic machines (1)

(1) - Remaining thread monitor carrier plate

(2) - Circuit board

To connect the remaining thread monitor:

1. Insert spacer (3) into the holes of the remaining thread monitor carrier

2. Attach the circuit board (2).

3. Connect the cables to the circuit board (2):

Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018

beam hits the reflective surface of the bobbin through the slot in the

bobbin case.

machines

①

②

③

plate (1).

• A = Valve circuit board

• B = Light barrier, left needle

• C = Light barrier, right needle

(3) - Spacer