Cavalli Audio Liquid Carbon Manuel - Sayfa 4

Amplifikatör Cavalli Audio Liquid Carbon için çevrimiçi göz atın veya pdf Manuel indirin. Cavalli Audio Liquid Carbon 15 sayfaları. Balanced transportable headphone amplifier

Sayfayı Yazdır

Important points to remember about the Cavalli

Audio Liquid Carbon

Balanced Transportable

Headphone Amplifier

The Liquid Carbon® is a lightweight, small, transportable balanced solid state Solid State

headphone amplifier. It is especially designed for handling a wide variety of headphones from

IEMs to planar magnetics.

The amp has both balanced (XLR) and single ended (RCA + 3.5mm) inputs. The input type is

selectable with a 2-position front panel pushbutton switch. The single ended input has an

internal solid state buffered phase splitter to create a balanced signal to drive the amp fully

balanced.

The amp has two gain settings to help with the wide range of headphone impedances and

sensitivities. The high gain is 3X and the low gain is 1X. The Liquid Carbon® circuit allows you to

hot switch the gain using the front panel switch.

The Liquid Carbon® has 3 outputs: 4 Pin XLR balanced, 4 Pin RSA (Kobiconn) balanced, and TRS

(standard ¼" phone plug) single ended. Note that the SE output, which comes from half of each

channel, only delivers ¼ the power of the balanced output.

The Liquid Carbon® is powered by a universal switch mode power supply (SMPS) which makes it

operational in nearly every location globally using a standard power cord suitable to the local

conditions with a standard IEC connection to the amp.

Page 4 of 15